News

TkkrLab 13,37 jarig bestaan

🇳🇱 · TkkrLab · admin

Onze eerst space aan molenstraat 74 Op 29 juni bestaat TkkrLab 13,37 jaar (gerekend vanaf het krijgen van de sleutel van de eerste space). Dit is een mooi moment om terug te kijken. In de zomer van 2010 bezocht ik (Dave Borghuis) Eth0 camp, waar de Fablab-truck aanwezig was en hackerspace Revspace en hackerspace Hack42. Hierdoor raakte ik geïnspireerd en vroeg ik me af waarom er nog geen hackerspace in Enschede was. Ik was al eerder bij deze hackerspaces geweest, dus was al bekend met dit coole concept. In dit soort situaties kun je twee dingen doen: wachten tot iemand anders dit organiseert of, wat ik deed, zelf een hackerspace starten. Dit was het moment dat ik aan de slag ging met het starten van een hackerspace in Enschede. Op 18 december 2010 vond de eerste meetup plaats bij MAC Berlijn in een café, open voor iedereen om te bezoeken. Hierbij moest ik nog wel even uitleggen wat een hackerspace is en wat je ervan kunt verwachten. Hieruit is een eerste groepje mensen ontstaan die uiteindelijk TkkrLab oprichtten en van de grond kregen. Na een aantal meetings (b

Uncategorized

Laser Cutting Electronics Box Panel

🇬🇧 · Derby Makers · Bernard Killeen

The electronics box has been drawn in a 3D modelling package. The objective is to produce a 2D drawing of the panel outline together with the cutouts. It is difficult to position the panel in the correct place on the cutter bed so that the apertures are cut in the right place and are correctly aligned with the panel outline. The cut file read in to the cutter has two layers. The first layer is the outline, and the second is the aperture that we want to cut. The first step is to place a piece of card on to the cutter bed and mark the outline layer on to the card. The second step is to place the blank panel on to the card and run the cut file again to cut the outline. This photo is of the outline plotted on to the card. This is a photo of the panel placed on to the card outline and after the apertures have been cut. This is a photo of the finished panel with the display and keypad fitted.

Maker Projects