Workshop on computer-aided manufacturing (CAM) in FreeCAD
Following the workshop on constraint-based/parametric modelling in FreeCAD, let’s take a look at CAM (i.e. computer-aided manufacturing) in FreeCAD! We’ll start with some theory on 3-axis CNC milling, covering Different types of milling bits Chipload RPM Feedrate Depth of cut Conventional versus climb cutting Next, we’ll check out some options in the Path workbench in FreeCAD, focusing on operations to generate different kinds of tool paths like Contours Pockets Holes In addition, we’ll look at several modifications of these paths, including Ramp entries Tags Dogbones If time permits, we’ll run a full example project on the CNC router in the Werkstatt. Date and time : Tuesday 14 May 2024 at 19:30 Location : Starship Factory, Building K-102, Klybeckstrasse 141, 4057 Basel ( route ) Requirements : Please install FreeCAD (version 0.21 or later) on your laptop before the workshop and check to see if it starts properly! We won’t have time to troubleshoot individual installations… Costs : None, though there is always the option to donate (see also here ) Registration : Not necessary, simply drop by (though please be on time)