Linksys WRT54GL with SD-card
Denna guide skrev jag hösten 2010 och nyligen ville David att jag skulle slänga upp den här, det lät som en bra ide så här är den: A guide of how to add a SD-card to your WRT54GL router and use it as root filesystem. Add the card I use a A-Data 2GB sd-card (cost me 59 sek 2010-10-21) and it works good, write speed about 600kb/s. This is how the card should be wired: source: http://www.adamkowalewski.com/linksys-wrt54gl/wrt54gl-sd-mod.html (404'ed last i checked: 2011-09-28) I wont go into details about the soldering, for info about that i recommend to search around in forums and wikies in the WRT-community, if someone want to add that part to this guide your very welcome! Configuration I use openwrt kamikaze 8.09.2 brcm-2.4 (linux 2.4 kernel becaus of better performance with mmc sd-card driver) http://downloads.openwrt.org/kamikaze/8.09.2/brcm-2.4/openwrt-wrt54g-squashfs.bin -file to flash with tftp or webui http://downloads.openwrt.org/kamikaze/8.09.2/brcm-2.4/openwrt-brcm-2.4-squashfs.trx -file to flash with mtd command-line tool more info can be found here: http://wiki.